GYEON Q² Rim Ceramic Coating 30ml

GYEON-rim-ceramic-quartz-coating.jpg
Q2_Rim_30ml_RGB.jpg
Q2_RIM_50-50.jpg
Q2_RIM_APLICATION2.jpg
Q2_RIM_WET_50-50.jpg
GYEON-rim-ceramic-quartz-coating.jpg
Q2_Rim_30ml_RGB.jpg
Q2_RIM_50-50.jpg
Q2_RIM_APLICATION2.jpg
Q2_RIM_WET_50-50.jpg

GYEON Q² Rim Ceramic Coating 30ml

58.00

Advanced quartz technology combined with user friendly characteristics

There are various wheel rim types available on the market, e.g. wet painted, powder coated, anodized or polished. Q² Rim is an appropriate product to secure each and every one of them. Even the owners of models with polished lips have registered that the need to refresh the so-called mirror effect, in comparison with other rim protective products, is significantly less frequent.

BOX CONTAINS: Q² RIM / MANUAL / APPLICATOR / 4 SUEDE CLOTHS

  • CONSUMPTION: 15ml / set

  • HARDNESS: +3H

  • TEMPERATURE RESISTANCE: >800'C

  • PH TOLERANCE: 2-11

  • THICKNESS: 0,5qm

  • DURABILITY: >12months/30k km

HIGH SELF CLEANING ABILITIES

Similar to other genuine SiO2-based coatings, Q² Rim offers superb self-cleaning abilities. It results in limiting the time needed to keep wheels, especially those with complicated patterns, impeccably clean. It protects against too much dust from brake pads being deposited on wheel rims and facilitates regular washing of rims with clean water under pressure. Using, additionally, a pH-neutral rim cleaning product will make the whole maintenance process easier. Q² Rim, unlike other conventional rim protection solutions, is also resistant to more aggressive cleaners.

TEMPERATURE RESISTANT

Wheels, just after the engine bay and exhausts, are the components that are most exposed to high temperatures. Q² Rim has an endurance capability exceeding 800 degrees Celsius without any damage to its original properties. The fact that this quartz coating is dedicated exclusively to rims is an asset and introduces a new level of quality within the field of rim protection, particularly when compared with conventional, synthetic wax-based products.

ADVICE ON APPLICATION AND PRECAUTIONS

Before you start applying, wash and degrease the surface with a strong degreasing agent (Q²M Iron is recommended). If additional impurities are visible, use Q²M Clay to remove them. Skin protection recommended. Work in a well-ventilated area. Store in a dark, dry and cool place. Keep out of reach of children. Avoid applying in direct sunlight.

 

Quantity:
Add To Cart

First time coating user? Try the GYEON CanCoat or the GYEON One. They’re likely the easiest coatings to apply for first timers, they don’t get tacky, quite easy to remove during application. GYEON Syncro uses Mohs as base coat and Skin as a topper, if you like to keep things simple and limited to 2 coats instead of Syncro’s triple coat, use GYEON Mohs instead. How about a single coat coating? Then the GYEON Pure is for you. It’s a single coat application that layers down a thick SiO2 layer. When applied properly, consumption for most coatings are approx 15~20ml per coat, CanCoat is about 25~30ml per coat. GYEON Rim is about 10ml per set of 4 wheels, and GYEON Leather Shield is about 20~25ml per full interior. The GYEON View can approx do 1~2 full treatments (front, sides, back windows).